International orders, please contact us for correct shipping fee.

Type 2 boards cover the following earlier consult vehicles:

• M30 Infiniti (VG30E)
• ECR32 Skyline (RB25DE)
• ECR33 Skyline (RB25DET)*1
• HCR32 Skyline (RB20DET)
• BNR32 Skyline (RB26DETT)*2
• Q45 Infiniti (VH45DE)*3
• U12 Stanza / Bluebird (KA24E)
• Y60 Patrol (TB42E)
• Z32 Fairlady 300ZX (VG30DE/DETT)


Nistune uses a daughter board for real-time tuning using a modified version of Nissan Consult. It provides faster transfer rates, realtime modification of maps, constants and tables using the Nistune software.

Provided with CPU connector, 28 pin socket and instructions

Note: You will require a consult cable to connect the laptop to your vehicle. Tax, shipping and transaction fees may apply

*Fitting requires posting the ECU to our PO Box in South Australia in which we will fit and test the Nistune board and return to you



*1 R33 RB25DET Skyline

The original R33 RB25DET ECU cannot be used with a Nistune board

(a) We recommend sourcing an R32 Skyline ECU which is compatible. These ECUs require little modification and reuse existing O2 sensor, knock sensor and TPS sensor (TPS idle switch is replaced by soft switch in firmware) and come with RB25 base maps and are the recommended ECU for tuning

Nissan ECU Part numbers on front of R32 ECU case:
23710-04Uxx: Uses spare LED output to run VCT
23710-11Uxx: Uses fuel pump idle control output to run VCT

VCT modification information here

Note: Series 2 there is no IACV (Air cond output idle up control valve) output on these ECUs. Recommend wiring IACV solenoid directly to the AC relay (same as Series 1)

Note: Manual transmission models only supported. If using an automoatic transmission model R33 Skyline then reportedly the R32 Skyline automatic transmission control module will work


(b) Alternative option is the Z32 300ZX VG30DE (1990-1992) / Z32 300ZX VG30DETT (1990-1993) ECU

These ECUs use different knock sensors which will need to be disabled, some other modification including connecting both O2 sensors together and removing fuel temp input to the ECU are required. There are mixed reports with tuning these particular ECUs so we recommend using the R32 ECU where possible.

Modification information here
Part number listing information here


*2 BNCR33/BNR34 Skyline GTR
Requires BNR32 RB26DETT ECU with modifications here


*3 Infiniti Q45 VH45DE
Models in years 1990-1992 (using removed high gear maps). We do not support later model ECUs due to technical issues